Designed for the measurement of trace moisture in process gases and dry compressed air.
The AcuDew dewpoint transmitter is fully compatible with the following range of single channel displays:
- AcuLoop, a plug in signal indicator for local display
- The panel mount AcuVu with 4-20 mA signal retransmission and fully programmable alarms
- The AcuTrak with additional onboard pressure dewpoint calculation capability and RS485 communications
- The SU4 sample system
The SHAW AcuDew is a high performance dewpoint transmitter that delivers robust and reliable operation as a 2-wire, 4-20 mA loop-powered device. Thanks to ultra high capacitance SHAW moisture sensing technology, it also ensures superior sensitivity, accuracy, repeatability and speed of response.
AcuDew offers various dewpoint measurement ranges, covering -120 °C to +20 °C (-184 °F to +68 °F). In addition, output units are configurable with a choice of °C dewpoint, °F dewpoint, ppm(V), ppb(V), g/m³ and lb/MMSCF.
For signal output. the AcuDew provides a linear 4-20 mA signal over the selected range and operates from a 7-28 V DC source (including a 24 V option). When installed in remote locations, this signal transmits data over long distances (up to 1,000 metres or 3,280 feet) without degradation. Furthermore, it withstands electrical noise and simplifies fault detection if the loop breaks. For digital communication, the AcuDew is also available with Modbus RTU Serial Line RS485.
The durable stainless-steel design includes an industrial M12 connector, which reduces setup time and simplifies wiring, installation and maintenance. Also, SHAW engineered the AcuDew to perform in extreme environmental and industrial conditions, with an IP66 (NEMA 4X) protection rating. Moreover, we test each dewpoint transmitter to withstand pressures up to 35,000kPa (350 bar), which allows direct pipeline connection.
You can install the AcuDew directly in the process line or integrate it into a sample conditioning system. Once installed, operation is simple, with minimal maintenance required. Because the device has no user operated controls in use, it also ensures long term unattended operation.
The SHAW AutoCal function lets users check and adjust the instrument’s span to correct for any deviation between annual laboratory calibrations. Additionally, you can perform AutoCal in situ, without needing skilled personnel or specialised equipment.
Finally. each AcuDew dewpoint transmitter arrives ready for immediate use, complete with a Certificate of Calibration traceable to National and International Humidity Standards, an instruction manual and two metres of cable.
Key features of the AcuDew dewpoint transmitter
Various ranges
Various dewpoint ranges are available, covering an overall range from -120 °C to +20 °C (-184 °F to +68 °F) dewpoint. We have colour coded all ranges for easy reference.
AutoCal
The most important and unique feature of the SHAW system is the AutoCal (automatic calibration) function… (read more)
Related products and accessories for the AcuDew
Product support for the AcuDew
Video tutorials
Part 1
AcuDew Modbus RTU Set Up Guide
Part 2
AcuDew Modbus RTU Set Up Guide
Downloads for the AcuDew
Do you have a question about this product?
This contact form will only capture the data you have provided. Contact form submissions will be kept for as long as necessary to fulfil your enquiry/request and to fulfil any legal basis for processing.










